contact us

Support

Optical fiber cable

发布时间:2017-08-11   

点击量:1092


An optical fiber cable is a cable containing one or more optical fibers. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed.

Design

A multi-fiber cable

Optical fiber consists of a core and a cladding layer, selected for total internal reflection due to the difference in the refractive indexbetween the two. In practical fibers, the cladding is usually coated with a layer of acrylate polymer or polyimide. This coating protects the fiber from damage but does not contribute to its optical waveguide properties. Individual coated fibers (or fibers formed into ribbons or bundles) then have a tough resin buffer layer and/or core tube(s) extruded around them to form the cable core. Several layers of protective sheathing, depending on the application, are added to form the cable. Rigid fiber assemblies sometimes put light-absorbing ("dark") glass between the fibers, to prevent light that leaks out of one fiber from entering another. This reduces cross-talk between the fibers, or reduces flare in fiber bundle imaging applications.[1]

 

Left: LC/PC connectors
Right: SC/PC connectors
All four connectors have white caps covering the ferrules.

For indoor applications, the jacketed fiber is generally enclosed, with a bundle of flexible fibrous polymer strength members like aramid (e.g. Twaron or Kevlar), in a lightweight plastic cover to form a simple cable. Each end of the cable may be terminated with a specialized optical fiber connector to allow it to be easily connected and disconnected from transmitting and receiving equipment.

An optical fiber breakout cable

For use in more strenuous environments, a much more robust cable construction is required. In loose-tube construction the fiber is laid helically into semi-rigid tubes, allowing the cable to stretch without stretching the fiber itself. This protects the fiber from tension during laying and due to temperature changes. Loose-tube fiber may be "dry block" or gel-filled. Dry block offers less protection to the fibers than gel-filled, but costs considerably less. Instead of a loose tube, the fiber may be embedded in a heavy polymer jacket, commonly called "tight buffer" construction. Tight buffer cables are offered for a variety of applications, but the two most common are "Breakout" and "Distribution". Breakout cables normally contain a ripcord, two non-conductive dielectric strengthening members (normally a glass rod epoxy), an aramid yarn, and 3 mm buffer tubing with an additional layer of Kevlar surrounding each fiber. The ripcord is a parallel cord of strong yarn that is situated under the jacket(s) of the cable for jacket removal.[2] Distribution cables have an overall Kevlar wrapping, a ripcord, and a 900 micrometer buffer coating surrounding each fiber. These fiber units are commonly bundled with additional steel strength members, again with a helical twist to allow for stretching.

A critical concern in outdoor cabling is to protect the fiber from contamination by water. This is accomplished by use of solid barriers such as copper tubes, and water-repellent jelly or water-absorbing powder surrounding the fiber.

Finally, the cable may be armored to protect it from environmental hazards, such as construction work or gnawing animals. Undersea cables are more heavily armored in their near-shore portions to protect them from boat anchors, fishing gear, and even sharks, which may be attracted to the electrical power that is carried to power amplifiers or repeaters in the cable.

Modern cables come in a wide variety of sheathings and armor, designed for applications such as direct burial in trenches, dual use as power lines, installation in conduit, lashing to aerial telephone poles, submarine installation, and insertion in paved streets.

Capacity and market

Modern fiber cables can contain up to a thousand fibers in a single cable, with potential bandwidth in the terabytes per second. It is estimated that no more than 1% of the optical fiber buried in recent years is actually "lit".[citation needed] Companies can lease or sell the unused fiber to other providers who are looking for service in or through an area. Many companies are "overbuilding" their networks for the specific purpose of having a large network of dark fiber for sale, reducing the overall need for trenching and municipal permitting.[citation needed]

In recent years[when?] the cost of small fiber-count pole-mounted cables has greatly decreased due to the high Japanese and South Korean demand for fiber to the home (FTTH) installations.[citation needed]

Reliability and quality

Optical fibers are inherently very strong, but the strength is drastically reduced by unavoidable microscopic surface flaws inherent in the manufacturing process. The initial fiber strength, as well as its change with time, must be considered relative to the stress imposed on the fiber during handling, cabling, and installation for a given set of environmental conditions. There are three basic scenarios that can lead to strength degradation and failure by inducing flaw growth: dynamic fatigue, static fatigues, and zero-stress aging.

Telcordia GR-20, Generic Requirements for Optical Fiber and Optical Fiber Cable, contains reliability and quality criteria to protect optical fiber in all operating conditions.[3] The criteria concentrate on conditions in an outside plant (OSP) environment. For the indoor plant, similar criteria are in Telcordia GR-409, Generic Requirements for Indoor Fiber Optic Cable.[4]

Cable types


[icon]This section requires expansion(June 2008)

Jacket material


The jacket material is application specific. The material determines the mechanical robustness, aging due to UV radiation, oil resistance, etc. Nowadays PVC is being replaced by halogen free alternatives, mainly driven by more stringent regulations.


MaterialHalogen-freeUV ResistanceRemark
LSFH PolymerYesGood[5]Good for indoor use
Polyvinyl chloride (PVC)NoGood[6]Being replaced by LSFH Polymer
Polyethylene (PE)YesPoor[7][8][9]Good for outdoor applications
Polyurethane (PUR)Yes?Highly flexible cables
Polybutylene terephthalate (PBT)YesFair?[10]Good for indoor use
Polyamide (PA)YesGood[11]-Poor[12]Indoor and outdoor use


Color coding

Patch cords

The buffer or jacket on patchcords is often color-coded to indicate the type of fiber used. The strain relief "boot" that protects the fiber from bending at a connector is color-coded to indicate the type of connection. Connectors with a plastic shell (such as SC connectors) typically use a color-coded shell. Standard color codings for jackets and boots (or connector shells) are shown below:


Buffer/jacket colorMeaning
Yellowsingle-mode optical fiber
Orangemulti-mode optical fiber
Aqua10 gig laser-optimized 50/125 micrometer multi-mode optical fiber
Greyoutdated color code for multi-mode optical fiber
BlueSometimes used to designate polarization-maintaining optical fiber
Connector BootMeaningComment
BluePhysical Contact (PC), 0°mostly used for single mode fibers; some manufacturers use this for polarization-maintaining optical fiber.
GreenAngle Polished (APC), 8°

BlackPhysical Contact (PC), 0°

Grey,BeigePhysical Contact (PC), 0°multimode fiber connectors
WhitePhysical Contact (PC), 0°

Red
High optical power. Sometimes used to connect external pump lasers or Raman pumps.


Remark: It is also possible that a small part of a connector is additionally colour-coded, e.g. the leaver of an E-2000 connector or a frame of an adapter. This additional colour coding indicates the correct port for a patchcord, if many patchcords are installed at one point.

Multi-fiber cables

Individual fibers in a multi-fiber cable are often distinguished from one another by color-coded jackets or buffers on each fiber. The identification scheme used by Corning Cable Systems is based on EIA/TIA-598, "Optical Fiber Cable Color Coding." EIA/TIA-598 defines identification schemes for fibers, buffered fibers, fiber units, and groups of fiber units within outside plant and premises optical fiber cables. This standard allows for fiber units to be identified by means of a printed legend. This method can be used for identification of fiber ribbons and fiber subunits. The legend will contain a corresponding printed numerical position number and/or color for use in identification.[13]


EIA598-A Fiber Color Chart[13]PositionJacket color1Blue2Orange3Green4Brown5Slate6White7Red8Black9Yellow10Violet11Rose12Aqua13Blue with black tracer14Orange with black tracer15Green with black tracer16Brown with black tracer17Slate with black tracer18White with black tracer19Red with black tracer20Black with yellow tracer21Yellow with black tracer22Violet with black tracer23Rose with black tracer24Aqua with black tracerColor coding of Premises Fiber Cable[13]Fiber Type / ClassDiameter (µm)Jacket ColorMultimode 1a50/125OrangeMultimode 1a62.5/125SlateMultimode 1a85/125BlueMultimode 1a100/140GreenSinglemode IVaAllYellowSinglemode IVbAllRed


Propagation speed and delay

Optical cables transfer data at the speed of light in glass (slower than vacuum). This is typically around 180,000 to 200,000 km/s, resulting in 5.0 to 5.5 microseconds of latency per km. Thus the round-trip delay time for 1000 km is around 11 ms.[14]

LOSSESS



This article may be too technical for most readers to understand. Please help improve this article to make it understandable to non-experts, without removing the technical details. The talk page may contain suggestions. (April 2012)


Typical modern multimode graded-index fibers have 3 dB/km of attenuation loss at 850 nm and 1 dB/km at 1300 nm. 9/125 singlemode loses 0.4/0.25 dB/km at 1310/1550 nm. POF (plastic optical fiber) loses much more: 1 dB/m at 650 nm. Plastic optical fiber is large core (about 1mm) fiber suitable only for short, low speed networks such as within cars.

Each connection made adds about 0.6 dB of average loss, and each joint (splice) adds about 0.1 dB. Depending on the transmitter power and the sensitivity of the receiver, if the total loss is too large the link will not function reliably.

Invisible IR light is used in commercial glass fiber communications because it has lower attenuation in such materials than visible light. However, the glass fibers will transmit visible light somewhat, which is convenient for simple testing of the fibers without requiring expensive equipment. Splices can be inspected visually, and adjusted for minimal light leakage at the joint, which maximizes light transmission between the ends of the fibers being joined.

The charts at Understanding Wavelengths In Fiber Optics and Optical power loss (attenuation) in fiber illustrate the relationship of visible light to the IR frequencies used, and show the absorption water bands between 850, 1300 and 1550 nm.

Safety

Because the infrared light used in communications can not be seen, there is a potential laser safety hazard to technicians. In some cases the power levels are high enough to damage eyes, particularly when lenses or microscopes are used to inspect fibers which are inadvertently emitting invisible IR. Inspection microscopes with optical safety filters are available to guard against this.

Small glass fragments can also be a problem if they get under someone's skin, so care is needed to ensure that fragments produced when cleaving fiber are properly collected and disposed of appropriately.

[edit] See also


Wikimedia Commons has media related to: Optical fiber cables


[edit] Notes and references

  1. ^ "Light collection and propagation"National Instruments' Developer Zonehttp://zone.ni.com/devzone/cda/ph/p/id/129#toc2. Retrieved 2007-03-19.
    Hecht, Jeff (2002). Understanding Fiber Optics (4th ed. ed.). Prentice Hall. ISBN 0-13-027828-9.

  2. ^ "Definition: rip cord". Its.bldrdoc.gov. http://www.its.bldrdoc.gov/fs-1037/dir-031/_4623.htm. Retrieved 2011-12-10.

  3. ^ "GR-20, Generic Requirements for Optical Fiber and Optical Fiber Cable". Telcordia. http://telecom-info.telcordia.com/site-cgi/ido/docs.cgi?ID=SEARCH&DOCUMENT=GR-20&DATE=&CLASS=&COUNT=1000.

  4. ^ "GR-409, Generic Requirements for Indoor Fiber Optic Cable". Telcordia. http://telecom-info.telcordia.com/site-cgi/ido/docs.cgi?ID=SEARCH&DOCUMENT=GR-409&.

  5. ^ "Polymethylmethacrylate - online catalogue source, sources, small quantity and quantities from". Goodfellow. http://www.goodfellow.com/E/Polymethylmethacrylate.html. Retrieved 2011-12-10.

  6. ^ "Polyvinylchloride - Unplasticised - online catalogue source, sources, small quantity and quantities from". Goodfellow. http://www.goodfellow.com/E/Polyvinylchloride-Unplasticised.html. Retrieved 2011-12-10.

  7. ^ http://www.goodfellow.com/E/Polyethylene-Highdensity.html

  8. ^ http://www.goodfellow.com/E/Polyethylene-LowDensity.html

  9. ^ "Polyethylene - U.H.M.W. - online catalogue source, sources, small quantity and quantities from". Goodfellow. http://www.goodfellow.com/E/Polyethylene-UHMW.html. Retrieved 2011-12-10.

  10. ^ http://www.goodfellow.com/E/Polybutyleneterephthalate.html

  11. ^ http://www.goodfellow.com/E/Polyamide-Nylon12-30GlassFibreReinforced.html

  12. ^ http://www.goodfellow.com/E/Polyamide-Nylon6.html

  13. a b c Leroy Davis (2007-02-21). "Fiber wire color coding"http://www.interfacebus.com/Fiber_Insulation_Color_Code.html. Retrieved 2007-12-01.

  14. ^ Latency and Jitter Retrieved 2011-05-29.

  15. ^ Optical Fiber (tutorial at lanshack.com) Retrieved 2010-08-20.

  16. ^ Calculating the Maximum Attenuation for Optical Fiber LinksCisco document 27042. Retrieved 2010-08-20.

[edit] External links


TEL:+0086 0769-21992000   FAX:+0086 0769-85995402  Mr Wang:+0086 13509210877 

Address:GuanCheng Science&Technology park2B,ShiLong Rd.,GuanLong Rd's Section
Dong Guang City,Guang Dong,China  E-mail:scwang@brolinktech.com 

粤ICP备17100569号-1 粤公网安备 44190002001813号 Copyright: BROLINK TECHNOLOGIES CO.,LTD  Technical support:MWTH